Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › OCCUPANT CLASSIFICATION SYSTEM

OCCUPANT CLASSIFICATION SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



DTC CHECK

HINT:
When DTC B1150/23 is detected as a result of troubleshooting for "AIRBAG SYSTEM", perform troubleshooting for the occupant classification system.



    A066288E01
  1. Check the DTCs.

    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to the ON position.

    3. Check the DTCs by following the prompts on the tester screen.

      HINT:
      Refer to the intelligent tester operator's manual for further details.

  2. Clear the DTCs.

    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to the ON position.

    3. Clear the DTCs by following the prompts on the tester screen.

      HINT:
      Refer to the intelligent tester operator's manual for further details.