Home › RESTRAINTS › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY

FRONT SEAT INNER BELT ASSEMBLY > INSTALLATION

for Preparation Click here


HINT:
Use the same procedures for the LH and RH.



1. INSTALL FRONT SEAT INNER BELT ASSEMBLY
  1. Install the inner belt assembly with the nut.

    Torque:
    42 N*m{ 430 kgf*cm , 31 ft.*lbf }



2. INSTALL FRONT SEAT CUSHION SHIELD INNER RH


3. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB (for Power Seat)


4. INSTALL RECLINING POWER SEAT SWITCH KNOB (for Power Seat)


5. INSTALL RECLINING ADJUSTER RELEASE HANDLE RH (for Manual Seat)


6. INSTALL VERTICAL SEAT ADJUSTER KNOB CAP (for Manual Seat)


7. INSPECT VERTICAL SEAT ADJUSTER KNOB RH (for Manual Seat)


8. INSTALL FRONT SEAT ASSEMBLY RH
  1. Place the front seat assembly RH in the cabin.

    NOTICE:
    Be careful not to damage the body.

  1. Connect the connectors under the front seat assembly RH.

  1. Install the front seat assembly RH with the 4 bolts.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }