Home › RESTRAINTS › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY

FRONT SEAT INNER BELT ASSEMBLY > REMOVAL

for Preparation Click here


HINT:
Use the same procedures for LH and RH.



1. REMOVE FRONT SEAT ASSEMBLY RH


2. REMOVE VERTICAL SEAT ADJUSTER KNOB RH (for Manual Seat)


3. REMOVE VERTICAL SEAT ADJUSTER KNOB CAP (for Manual Seat)


    B089215E01
  1. Using a scraper, disengage the 3 claws and remove the vertical seat adjuster knob cap.

    HINT:
    Tape the scraper tip before use.



4. REMOVE VERTICAL ADJUSTING HANDLE NO. 2 (for Manual Seat)
  1. Remove the 2 screws and vertical adjusting handle No. 2.



5. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH (for Manual Seat)
  1. Using a screwdriver, pry out the reclining adjuster release handle LH.



6. REMOVE RECLINING POWER SEAT SWITCH KNOB (for Power Seat)
  1. Using a screwdriver, remove the reclining power seat switch knob.

    HINT:
    Tape the screwdriver tip before use.



7. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB (for Power Seat)
  1. Using a screwdriver, remove the slide & vertical power seat switch knob.

    HINT:
    Tape the screwdriver tip before use.



8. REMOVE FRONT SEAT CUSHION SHIELD INNER RH
  1. Remove the screw.

  1. Using a screwdriver, disengage the 2 claws and clip, and remove the front seat cushion shield inner RH

    HINT:
    Tape the screwdriver tip before use.



9. REMOVE FRONT SEAT INNER BELT ASSEMBLY