Home › BODY ELECTRICAL › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM

WIRELESS DOOR LOCK CONTROL SYSTEM > DATA LIST / ACTIVE TEST

for Preparation Click here



DATA LIST

HINT:
The wireless door lock control data list can be displayed while the intelligent tester is connected to the DLC3 with the ignition switch in the ON position. Follow the prompts on the tester screen to access the DATA LIST.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch ON.

  3. Read the DATA LIST according to the display on the tester.

    BODY: 
    Item (Display)
    Measurement Item / Display (Range)
    Normal Condition
    Diagnostic Note
    KEY UNLK WRN SW
    Unlock warning switch / ON or OFF
    ON: Ignition key is inserted
    OFF: Ignition key is not inserted
    -


ACTIVE TEST

HINT:
Performing the ACTIVE TEST using the intelligent tester allows components such as the relay, VSV and actuator to operate without removing parts. Performing the ACTIVE TEST as the first step in troubleshooting is one way to shorten labor time.
It is possible to display the DATA LIST during the ACTIVE TEST.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to the ON position.

  3. According to the display on the tester, preform the ACTIVE TEST.

    HINT:
    The ignition switch must be turned to the ON position to proceed with the ACTIVE TEST using the intelligent tester.


    BODY: 
    Item (Display)
    Test Details
    Diagnostic Note
    BUZZ CONT SOUND
    Turns wireless door lock buzzer ON /OFF
    -
    BUZZ RESP SOUND
    Turns wireless door lock buzzer ON / OFF
    -