Symbols (Terminal No.)
| Wiring Color
| Terminal Description
| Condition
| Specified Condition
|
TIRE PRESS (C8-1) - Body ground
| P-B - Body ground
| Tire pressure signal
| Turn the ignition switch to the ON position, TIRE PRESSURE indicator light OFF
| 10 to 14 V
|
Turn the ignition switch to the ON position, TIRE PRESSURE indicator light ON
| Below 1 V
|
AIRSUS HI (C8-2) (*1) - Body ground
| Y - Body ground
| Auto height control signal
| Turn the ignition switch to the ON position, HI indicator light OFF
| 10 to 14 V
|
Turn the ignition switch to the ON position, HI indicator light ON
| Below 1 V
|
AIRSUS N (C8-3) (*1) - Body ground
| Y-B - Body ground
| Auto height control signal
| Turn the ignition switch to the ON position, N indicator light OFF
| 10 to 14 V
|
Turn the ignition switch to the ON position, N indicator light ON
| Below 1 V
|
AIRSUS LO (C8-4) (*1) - Body ground
| BR-B - Body ground
| Auto height control signal
| Turn the ignition switch to the ON position, LO indicator light OFF
| 10 to 14 V
|
Turn the ignition switch to the ON position, LO indicator light ON
| Below 1 V
|
AIRSUS OFF (C8-5) (*1) - Body ground
| Y-G - Body ground
| Auto height control signal
| Turn the ignition switch to the ON position, OFF indicator light OFF
| 10 to 14 V
|
Turn the ignition switch to the ON position, OFF indicator light ON
| Below 1 V
|
WASHER (C8-6) (*2) - Body ground
| V-W - Body ground
| Washer level signal
| Turn the ignition switch to the ON position, washer level indicator light OFF
| 10 to 14 V
|
Turn the ignition switch to the ON position, washer level indicator light ON
| Below 1 V
|
CHECK E/G (C8-7) - Body ground
| R-B - Body ground
| Check engine indicator light signal
| Turn the ignition switch to the ON position, CHECK E/G warning light ON
| Below 1 V
|
Turn the ignition switch to the ON position, CHECK E/G warning light OFF
| 10 to 14 V
|
OIL PRS (C8-8) - Body ground
| LG-B - Body ground
| Oil pressure signal
| Turn the ignition switch to the ON position, OIL PRESS indicator light OFF
| 10 to 14 V
|
Turn the ignition switch to the ON position, OIL PRESS indicator light ON
| Below 1 V
|
RSCA OFF (C8-10) (*3) - Body ground
| L-Y - Body ground
| Roll sending of curtain shield airbag OFF singal
| Turn the ignition switch to the ON position, RSCA OFF indicator light OFF
| 10 to 14 V
|
Turn the ignition switch to the ON position, RSCA OFF indicator light ON
| Below 1 V
|
CRUISE (C8-11) - Body ground
| LG - Body ground
| CRUISE indicator light signal
| Turn the ignition switch to the ON position, CRUISE indicator light OFF
| 10 to 14 V
|
Turn the ignition switch to the ON position, CRUISE indicator light ON
| Below 1 V
|
DAC (C8-12) (*4) - Body ground
| BR-Y - Body ground
| Downhill assist control signal
| Turn the ignition switch to the ON position, DAC indicator light OFF
| 10 to 14 V
|
Turn the ignition switch to the ON position, DAC indicator light ON
| Below 1 V
|
A/T OIL TEMP (C8-15) - Body ground
| P - Body ground
| A/T OIL TEMP indicator light signal
| Turn the ignition switch to the ON position, A/T OIL TEMP indicator light OFF
| 10 to 14 V
|
Turn the ignition switch to the ON position, A/T OIL TEMP indicator light ON
| Below 1 V
|
CHARGE (C8-16) - Body ground
| GR - Body ground
| CHARGE warning light signal
| Turn the ignition switch to the ON position, CHARGE warning light OFF
| 10 to 14 V
|
Turn the ignition switch to the ON position, CHARGE warning light ON
| Below 1 V
|
ALL DOOR INPUT (C8-17) - Body ground
| V-Y - Body ground
| All door condition signal
| Any door open
| Below 1 V
|
All the door is closed
| 10 to 14 V
|
BRAKE LEVEL (C8-18) - Body ground
| LG - Body ground
| Brake fluid level warning light signal
| Turn the ignition switch to the ON position, BRAKE warning light OFF
| 10 to 14 V
|
Turn the ignition switch to the ON position, BRAKE warning light ON
| Below 1 V
|
ACTIVE BRAKE (C8-19) - Body ground
| B-L - Body ground
| BRAKE warning light signal
| Turn the ignition switch to the ON position, BRAKE warning light OFF
| 10 to 14 V
|
Turn the ignition switch to the ON position, BRAKE warning light ON
| Below 1 V
|
UART IN (C9-2) - Body ground
| BR-B - Body ground
| A/C signal (UART INPUT)
| Turn the ignition switch to the ON position
| Signal wave
|
UART OUT (C9-3) - Body ground
| W-L - Body ground
| A/C signal (UART OUTPUT)
| Turn the ignition switch to the ON position
| Signal wave
|
SP INPUT (C9-4) - Body ground
| GR-R - Body ground
| Speed signal (Input)
| Turn the ignition switch to the ON position, turn the wheel slowly
| Pulse generation (See waveform 1)
|
4P-OUT (C9-5) - Body ground
| V-FR - Body ground
| Speed signal (Output)
| Turn the ignition switch to the ON position, turn the wheel slowly
| Pulse generation (See waveform 1)
|
TM INPUT (C9-6) - Body ground
| B-W - Body ground
| Tachometer signal
| Turn the ignition switch to the ON position, engine idle speed
| Pulse generation (See waveform 2)
|
TEMP COMMUNICATION INPUT (C9-7) - Body ground
| L-B - Body ground
| A/C signal (Temp. input)
| Turn the ignition switch to the ON position
| Pulse generation (See waveform 3)
|
TAU-G INPUT (C9-8) - Body ground
| R-L - Body ground
| Injector No. 1 signal
| Turn the ignition switch to the ON position
| Pulse generation (See waveform 4)
|
D SEAT BELT INPUT (C9-12) - Body ground
| G-Y - Body ground
| Driver seat belt warning light signal
| Turn the ignition switch to the ON position, driver side seat belt warning light OFF
| 10 to 14 V
|
Turn the ignition switch to the ON position, driver side seat belt warning light blinks
| Below 1 V
|
P SEAT BELT INPUT (C9-13) - Body ground
| L-R - Body ground
| Passenger seat belt warning light signal (Input)
| Turn the ignition switch to the ON position, passenger side seat belt warning light blinks
| Below 1 V
|
Turn the ignition switch to the ON position, passenger side seat belt warning light OFF
| 10 to 14 V
|
ST SIGNAL INPUT (C9-16) - Body ground
| B-Y - Body ground
| Start signal
| Turn the ignition switch off
| Below 1 V
|
Turn the ignition switch to the ON position
| 10 to 14 V
|
P SEAT BELT OUT (C9-18) - Body ground
| LG - Body ground
| Passenger seat belt warning light signal (Output)
| Turn the ignition switch to the ON position, passenger side seat belt warning light OFF
| 10 to 14 V
|
Turn the ignition switch to the ON position, passenger side seat belt warning light blinks
| Below 1 V
|
KEY INPUT (C9-19) - Body ground
| V-G - Body ground
| Ignition key signal
| Turn the ignition switch to the ON position, ignition key is inserted
| Below 1 V
|
Turn the ignition switch to the ON position, ignition key is not inserted
| 10 to 14 V
|
A/T (R) (C10-1) - Body ground
| R-Y - Body ground
| A/T shift indicator light signal
| Turn the ignition switch to the ON position, A/T (R) indicator light OFF
| Below 1 V
|
Turn the ignition switch to the ON position, A/T (R) indicator light ON
| 10 to 14 V
|
ACTIVE AIRBAG INPUT (C10-2) - Body ground
| B-Y - Body ground
| Airbag indicator light signal
| Turn the ignition switch to the ON position, AIRBAG indicator light OFF
| Below 1 V
|
Turn the ignition switch to the ON position, AIRBAG indicator light ON
| 8 to 14 V
|
FUEL (FR) (C10-3) - Body ground
| BR-R - Body ground
| Fuel signal
| Turn the ignition switch to the ON position, fuel level is FULL
| Below 1 V
|
Turn the ignition switch to the ON position, fuel level is EMPTY
| 4 to 5 V
|
TAU-B INPUT (C10-5) - Body ground
| B-O - Body ground
| IG2 signal
| Turn the ignition switch off
| Below 1 V
|
Turn the ignition switch to the ON position
| 10 to 14 V
|
TURN R (C10-6) - Body ground
| L-Y - Body ground
| Turn indicator light RH signal
| Turn the ignition switch to the ON position, turn signal RH indicator light OFF
| Below 1 V
|
Turn the ignition switch to the O, position, turn signal RH indicator light ON
| 10 to 14 V
|
RHEOSTAT (TR) (C10-7) - Body ground
| W-G - Body ground
| Rheostat Signal
| Turn the ignition switch to the ON position, light control rheostat is turned volume up → volume down
| Pulse generation (See waveform 5)
|
D DOOR INPUT (C10-8) - Body ground
| W-L - Body ground
| Driver door condition signal
| Driver door OPEN
| Below 1 V
|
Driver door CLOSE
| 10 to 14 V
|
ILL+ (C10-9) - Body ground
| G - Body ground
| Illumination signal
| Light control switch off
| Below 1 V
|
Light control switch TAIL
| 10 to 14 V
|
TURN L (C10-10) - Body ground
| L-B - Body ground
| Turn indicator light LH signal
| Turn the ignition switch to the ON position, turn signal LH indicator light OFF
| Below 1 V
|
Turn the ignition switch to the ON position, turn signal LH indicator light ON
| 10 to 14 V
|
FUEL GND (C10-11) - Body ground
| P - Body ground
| Ground (Fuel ground)
| Always
| Below 1 V
|
E/G GND (C10-13) - Body ground
| BR - Body ground
| Ground (Engine ground)
| Always
| Below 1 V
|
IGN2 (C10-15) - Body ground
| R-L - Body ground
| IG2 signal
| Turn the ignition switch off
| Below 1 V
|
Turn the ignition switch to the ON position
| 10 to 14 V
|
+B (C10-16 ) - Body ground
| R - Body ground
| Battery
| Always
| 10 to 14 V
|
VSC OFF (*4) / AUTO LSD (*5) (C10-17) - Body ground
| L-W - Body ground
| VSC OFF signal (*4) AUTO LSD signal (*5)
| Turn the ignition switch to the ON position, VSC OFF (*4), AUTO LSD (*5) indicator light OFF
| 10 to 14 V
|
Turn the ignition switch to the ON position, VSC OFF (*4), AUTO LSD (*5) indicator light ON
| Below 1 V
|
VSC TRAC (C10-18) (*4) - Body ground
| Y-R - Body ground
| VSC TRAC signal
| Turn the ignition switch to the ON position, VSC TRAC indicator light OFF
| 10 to 14 V
|
Turn the ignition switch to the ON position, VSC TRAC indicator light ON
| Below 1 V
|
SLIP (C10-20) - Body ground
| R - Body ground
| SLIP signal
| Turn the ignition switch to the ON position, SLIP indicator light OFF
| 10 to 14 V
|
Turn the ignition switch to the ON position, SLIP indicator light ON
| Below 1 V
|
4WD (C11-5) (*6) - Body ground
| W-G - Body ground
| 4WD indicator light signal
| Turn the ignition switch to the ON position, 4WD indicator light OFF
| 10 to 14 V
|
Turn the ignition switch to the ON position, 4WD indicator light ON
| Below 1 V
|
CTR DIFF LOCK (C11-6) (*4) - Body ground
| G-R - Body ground
| CTR DIFF LOCK signal
| Turn the ignition switch to the ON position, CTR DIFF LOCK indicator light OFF
| 10 to 14 V
|
Turn the ignition switch to the ON position, CTR DIFF LOCK indicator light ON
| Below 1 V
|
4LO (C11-7) (*2) - Body ground
| BR-W - Body ground
| Low speed four-wheel drive signal
| Turn the ignition switch to the ON position, 4WD indicator light OFF
| 10 to 14 V
|
Turn the ignition switch to the ON position, 4WD indicator light ON
| Below 1 V
|
Fr. FOG (C11-10) - Body ground
| G - Body ground
| Front fog light signal
| Turn the ignition switch to the ON position, Fr. FOG indicator light OFF
| Below 1 V
|
BEAM+ (C11-12) - Body ground
| R-W - Body ground
| Hi-beam signal
| Always
| 10 to 14 V
|
BEAM- (C11-13) - Body ground
| R-W - Body ground
| Hi-beam signal
| Turn the ignition switch to the ON position, BEAM indicator light OFF
| 10 to 14 V
|
Turn the ignition switch to the ON position, BEAM indicator light ON
| Below 1 V
|
A/T (L) (C11-14) - Body ground
| B-L - Body ground
| A/T shift indicator light signal
| Turn the ignition switch to the ON position, A/T (L) indicator light OFF
| Below 1 V
|
Turn the ignition switch to the ON position, A/T (L) indicator light ON
| 10 to 14 V
|
A/T (2) (C11-15) - Body ground
| P-L - Body ground
| A/T shift indicator light signal
| Turn the ignition switch to the ON position, A/T (2) indicator light OFF
| Below 1 V
|
Turn the ignition switch to the ON position, A/T (2) indicator light ON
| 10 to 14 V
|
A/T (3) (C11-16) - Body ground
| L - Body ground
| A/T shift indicator light signal
| Turn the ignition switch to the ON position, A/T (3) indicator light OFF
| Below 1 V
|
Turn the ignition switch to the ON position, A/T (3) indicator light ON
| 10 to 14 V
|
A/T (4) (C11-17) - Body ground
| G - Body ground
| A/T shift indicator light signal
| Turn the ignition switch to the ON position, A/T (4) indicator light OFF
| Below 1 V
|
Turn the ignition switch to the ON position, A/T (4) indicator light ON
| 10 to 14 V
|
A/T (D) (C11-18) - Body ground
| W - Body ground
| A/T shift indicator light signal
| Turn the ignition switch to the ON position, A/T (D) indicator light OFF
| Below 1 V
|
Turn the ignition switch to the ON position, A/T (D) indicator light ON
| 10 to 14 V
|
A/T (N) (C11-19) - Body ground
| G-W - Body ground
| A/T shift indicator light signal
| Turn the ignition switch to the ON position, A/T (N) indicator light OFF
| Below 1 V
|
Turn the ignition switch to the ON position, A/T (N) indicator light ON
| 10 to 14 V
|
A/T (P) (C11-20) - Body ground
| G-B - Body ground
| A/T shift indicator light signal
| Turn the ignition switch to the ON position, A/T (P) indicator light OFF
| Below 1 V
|
Turn the ignition switch to the ON position, A/T (P) indicator light ON
| 10 to 14 V
|