Home › BODY › SEAT › FRONT POWER SEAT LUMBAR SWITCH

FRONT POWER SEAT LUMBAR SWITCH > INSPECTION

for Preparation Click here



1. INSPECT FRONT POWER SEAT LUMBAR SWITCH


    B068208E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Switch Position
    Specified Condition
    1 (R) - 2 (E2)
    HOLD
    Below 1 Ω
    3 (B) - 4 (H)
    HOLD
    Below 1 Ω
    1 (R) - 2 (E2)
    OFF
    Below 1 Ω
    4 (H) - 5 (E1)
    OFF
    Below 1 Ω
    1 (R) - 3 (B)
    RELEASE
    Below 1 Ω
    4 (H) - 5 (E1)
    RELEASE
    Below 1 Ω

    If the result is not as specified, replace the switch.