Home › BODY › SEAT › SEAT HEATER SWITCH

SEAT HEATER SWITCH > INSPECTION

for Preparation Click here



1. INSPECT SEAT HEATER SWITCH LH


    B065858
  1. Check the resistance between the terminals when the switch is operated.

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    3 - 4
    ON (MAX)
    Below 1 Ω
    5 - 6
    ON (MAX)
    Below 1 Ω
    -
    OFF
    10 kΩ or higher
    4 - 5
    ON (MIN)
    Below 1 Ω
    1 - 2
    Illumination circuit
    Below 1 Ω

  1. Inspect the seat heater switch indicator.

    1. Connect the positive (+) lead from the battery to terminal 3 and the negative (-) lead to terminal 1.

    2. Push the seat heater switch ON and check that the indicator lights up.
      If the result is not as specified, replace the seat heater switch and inspect the circuits connected to the other parts.



    B065621
  1. Inspect the seat heater switch illumination.

    1. Connect the positive (+) lead from the battery to terminal 6 and the negative (-) lead to terminal 5.

    2. Check that the illumination lights up.
      If the result is not as specified, replace the seat heater switch or bulb.



2. INSPECT SEAT HEATER SWITCH RH


    B065858
  1. Check the resistance between the terminals when the switch is operated.

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    3 - 4
    ON (MAX)
    Below 1 Ω
    5 - 6
    ON (MAX)
    Below 1 Ω
    -
    OFF
    10 kΩ or higher
    4 - 5
    ON (MIN)
    Below 1 Ω
    1 - 2
    Illumination circuit
    Below 1 Ω

  1. Inspect the seat heater switch indicator.

    1. Connect the positive (+) lead from the battery to terminal 3 and the negative (-) lead to terminal 1.

    2. Push the seat heater switch ON and check that the indicator lights up.
      If the result is not as specified, replace the seat heater switch and inspect the circuits connected to the other parts.



    B065621
  1. Inspect the seat heater switch illumination.

    1. Connect the positive (+) lead from the battery to terminal 6 and the negative (-) lead to terminal 5.

    2. Check that the illumination lights up.
      If the result is not as specified, replace the seat heater switch or bulb.