QUARTER WINDOW GLASS > REMOVAL |
| 1. REMOVE REAR SEAT CUSHION ASSEMBLY LH |
| 2. REMOVE REAR SEATBACK ASSEMBLY LH |
| 3. REMOVE ROOF SIDE GARNISH ASSEMBLY INNER LH |
Remove the deck board.
Remove the deck board assembly.
Remove the rear floor mat support plate.
Remove the back door weatherstrip.
Remove the rear door scuff plate LH.
Remove the rear door opening trim weatherstrip LH.
Remove the luggage hold belt striker assembly.
Remove deck trim cover rear.
Remove the deck floor box LH
Remove deck trim side panel assembly LH.
Remove the quarter trim cover RH.
Remove the tonneau cover hook B.
Remove the roof side garnish assembly inner LH.
| 4. REMOVE QUARTER WINDOW ASSEMBLY LH |
![]() |
Disconnect the connectors.
Pass a piano wire through between the body and glass from the interior.
![]() |
Tie both wire ends to wooden blocks or similar objects.
Cut off the adhesive by pulling the piano wire around the glass.
Remove the glass.
| 5. CLEAN QUARTER WINDOW ASSEMBLY LH |
Clean the outer circumference of the glass with white gasoline.