Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › OCCUPANT CLASSIFICATION ECU

OCCUPANT CLASSIFICATION ECU > REMOVAL

for Preparation Click here



1. PRECAUTION

CAUTION:
Be sure to read "PRECAUTION" thoroughly before servicing (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.



3. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat)
  1. Disconnect the connectors under the front seat assembly LH.

  1. Remove the 4 bolts and front seat assembly LH.

    NOTICE:
    Be careful not to damage the body.



4. REMOVE FRONT SEAT ASSEMBLY (for Power Seat)
  1. Disconnect the connectors under the front seat assembly LH.

  1. Remove the 4 bolts and front seat assembly LH.

    NOTICE:
    Be careful not to damage the body.



5. REMOVE OCCUPANT CLASSIFICATION ECU
  1. Disconnect the 2 connectors from the occupant classification ECU.



    H045341
  1. Using a screwdriver, remove the occupant classification ECU.