Home › BODY ELECTRICAL › AUDIO / VISUAL › REAR SEAT ENTERTAINMENT SYSTEM

REAR SEAT ENTERTAINMENT SYSTEM > HOW TO PROCEED WITH TROUBLESHOOTING

for Preparation Click here




1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.CUSTOMER PROBLEM ANALYSIS
    1. Interview the customer and confirm the trouble.

      1. Confirm the problem by duplicating the conditions described by the customer.


    NEXT


    3.BASIC INSPECTION
    1. Basic inspection.

      1. Measure the battery voltage.

        Standard voltage:
        11 to 14 V

    2. with Navigation system:
      Check the power supply to the radio and navigation assembly.

      1. Turn the ignition switch to the ACC position.

      2. Check whether the display appears on the radio and navigation assembly.

    3. without Navigation system:
      Check the power supply to the radio receiver.

      1. Turn the ignition switch to the ACC position.

      2. Check whether the display appears on the radio receiver.



    .
    DISPLAY DOES NOT APPEAR (GO TO "NAVIGATION SYSTEM" OR "AUDIO AND VISUAL SYSTEM").

    .
    DISPLAY APPEARS (Go to step 4).

    4.PROBLEM SYMPTOMS TABLE
    1. Refer to the problem symptoms table (Click here).


    NEXT


    5.CIRCUIT INSPECTION AND PART INSPECTION

      NEXT


      6.IDENTIFICATION OF PROBLEM

        NEXT


        7.REPAIR OR REPLACE

          NEXT


          8.CONFIRMATION TEST

            NEXT

            END