TRANSFER ASSEMBLY > INSPECTION |
| 1. INSPECT TRANSFER INPUT SHAFT |
![]() |
Using a micrometer, measure the outer diameter of the input shaft journal surface.
![]() |
Using a dial indicator, measure the inside diameter of the input shaft bushing.
| 2. INSPECT PLANETARY PINION GEAR THRUST CLEARANCE |
![]() |
Using a feeler gauge, measure the thrust clearance of the planetary pinion gear.
| 3. INSPECT PLANETARY PINION GEAR RADIAL CLEARANCE |
![]() |
Using a dial indicator, measure the radial clearance of the planetary pinion gear.
| 4. INSPECT DRIVE SPROCKET THRUST CLEARANCE |
![]() |
Using a feeler gauge, measure the thrust clearance of the drive sprocket.
| 5. INSPECT DRIVE SPROCKET RADIAL CLEARANCE |
![]() |
Using a dial indicator, measure the radial clearance of the drive sprocket.
| 6. INSPECT TRANSFER OUTPUT SHAFT REAR |
![]() |
Using a micrometer, measure the outer diameter of the output shaft rear journal surface.
| 7. INSPECT HIGH AND LOW CLUTCH SLEEVE AND GEAR SHIFT FORK NO. 2 CLEARANCE |
![]() |
Using vernier calipers, measure the thickness of the gear shift fork No. 2 claw.
Using vernier calipers, measure the groove of the high and low clutch sleeve.
Calculate a clearance between the high and low clutch sleeve and gear shift fork No. 2 clearance.
| 8. INSPECT FRONT DRIVE CLUTCH SLEEVE AND CTR DIFFERENTIAL LOCK FORK SUB-ASSEMBLY CLEARANCE |
![]() |
Using vernier calipers, measure the thickness of the CTR differential lock fork clow.
Using vernier calipers, measure the groove of the front drive clutch sleeve.
Calculate a clearance between the front drive clutch sleeve and CTR differential lock fork.
| 9. INSPECT CENTER DIFFERENTIAL CASE AND HIGH AND LOW CLUTCH SLEEVE |
![]() |
Check that the tip of the spline gear of the front drive clutch sleeve is not worn.
Install the front drive clutch sleeve to the center differential case and check that the front drive clutch sleeve moves smoothly.
| 10. INSPECT CENTER DIFFERENTIAL CASE AND FRONT DRIVE CLUTCH SLEEVE |
![]() |
Check that the tip of the spline gear of the front drive clutch sleeve is not worn.
Install the front drive clutch sleeve to the center differential case and check that the front drive clutch sleeve moves smoothly.