FRONT AXLE HUB (for 2WD) > DISASSEMBLY |
| 1. REMOVE KNUCKLE GREASE RETAINER CAP INNER |
![]() |
Using a screwdriver and a hammer, remove the knuckle grease retainer cap inner.
| 2. REMOVE FRONT WHEEL ADJUSTING NUT |
![]() |
Using SST and a hammer, unstake the adjusting nut.
![]() |
Using SST, remove the adjusting nut.
| 3. REMOVE FRONT AXLE HUB |
![]() |
Remove the 4 bolts and axle hub from the steering knuckle.
Remove the O-ring from the axle hub.
| 4. REMOVE FRONT AXLE WITH ABS ROTOR LH BEARING ASSEMBLY |
![]() |
Fix the front axle hub soft in vise.
Using SST, remove the bearing.
| 5. REMOVE FRONT AXLE HUB SPACER |
![]() |
Using a screwdriver, remove the front axle hub spacer.