Home › SUSPENSION & AXLE › AXLE › FRONT AXLE HUB (for 2WD)

FRONT AXLE HUB (for 2WD) > REASSEMBLY

for Preparation Click here



1. INSTALL FRONT AXLE HUB SPACER


    F042762
  1. Using a brass bar and a hammer, install the new front axle hub spacer.

    NOTICE:
    Do not damage the spacer.



2. INSTALL FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY


    C098702E01
  1. Using SST and a press, install a new bearing to the front axle hub.

    SST
    09649-17010  



3. INSTALL FRONT AXLE HUB


    F042759
  1. Apply the MP grease to a new O-ring.

  1. Install the new O-ring to the axle hub.

  1. Install the dust cover, axle hub to the steering knuckle with the 4 bolts.

    Torque:
    80 N*m{ 816 kgf*cm , 59 ft.*lbf }



4. INSTALL FRONT WHEEL ADJUSTING NUT


    F042758E01
  1. Using SST, install a new adjusting nut.

    Torque:
    275 N*m{ 2,804 kgf*cm , 203 ft.*lbf }

    SST
    09318-12010  



5. INSTALL KNUCKLE GREASE RETAINER CAP INNER


    F042765
  1. Using a brass bar and a hammer, install a new knuckle grease retainer cap inner.

    NOTICE:
    Do not damage the knuckle grease retainer cap inner.