Home › SUSPENSION & AXLE › AXLE › FRONT AXLE HUB (for 4WD)

FRONT AXLE HUB (for 4WD) > DISASSEMBLY

for Preparation Click here



1. REMOVE STEERING KNUCKLE OIL SEAL


    F042766
  1. Using a screwdriver and hammer, remove the steering knuckle LH oil seal.



2. REMOVE FRONT AXLE HUB


    F042759
  1. Remove the 4 bolts and axle hub from the steering knuckle.

  1. Remove the O-ring from the axle hub.



3. REMOVE FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY


    F042760E02
  1. Fix the front axle hub soft in vise.

  1. Using SST, remove the bearing.

    SST
    09710-30021   (09710-03051)
    09950-40011   (09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04061, 09957-04010, 09958-04011)



4. REMOVE FRONT AXLE HUB SPACER


    F042761
  1. Using a screwdriver, remove the front axle hub spacer.