Home › SUSPENSION & AXLE › AXLE › FRONT AXLE HUB (for 4WD)

FRONT AXLE HUB (for 4WD) > REASSEMBLY

for Preparation Click here



1. INSTALL FRONT AXLE HUB SPACER


    F042762
  1. Using a brass bar and a hammer, install a new front axle hub spacer.

    NOTICE:
    Do not damage the spacer.



2. INSTALL FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY


    C098702E01
  1. Using SST and a press, install a new bearing to the front axle hub.

    SST
    09649-17010  



3. INSTALL FRONT AXLE HUB


    F042759
  1. Apply MP grease to a new O-ring.

  1. Install the new O-ring to the axle hub.

  1. Install the dust cover and axle hub to the steering knuckle with the 4 bolts.

    Torque:
    80 N*m{ 816 kgf*cm , 59 ft.*lbf }



4. INSTALL STEERING KNUCKLE OIL SEAL


    F042767E02
  1. Using SST and a press, install a new steering knuckle oil seal.

    SST
    09527-17011  
    09950-70010   (09951-07100)
    09951-01000