Home › SUSPENSION & AXLE › AXLE › REAR AXLE SHAFT

REAR AXLE SHAFT > REASSEMBLY

for Preparation Click here



1. INSTALL REAR AXLE HUB BOLT


    G020977
  1. Install a new deflector gasket and deflector to the rear axle shaft.

    HINT:
    Align the 2 notches.



    G020973
  1. Pass the 6 bolts through the axle hub.

  1. Pass a washer plate, as shown in the illustration, through the hub bolt, and install the hub bolt as tightening the hub nut.



2. INSTALL REAR AXLE HUB AND BEARING ASSEMBLY


3. INSTALL PARKING BRAKE PLATE TO REAR AXLE HOUSING BOLT


    F042777
  1. Position the backing plate on a rear axle bearing assembly, and install the 4 parking brake plate to rear axle housing bolts using 2 socket wrenches and a press.



4. INSTALL REAR AXLE SHAFT WASHER
  1. Install the rear axle shaft plate washer onto the rear axle shaft.



5. INSTALL REAR AXLE BEARING RETAINER INNER
  1. Install a new rear axle bearing retainer inner to the rear axle shaft.