Home › BODY ELECTRICAL › LIGHTING › FOG LIGHT RELAY

FOG LIGHT RELAY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT FOG LIGHT RELAY


    B113729
  1. Remove the fog light relay.

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester connection
    Specified condition
    3 - 5
    10 kΩ or higher
    3 - 5
    Below 1 Ω
    (When battery voltage is applied to terminals 1 and 2)

    If the result is not as specified, replace the fog light relay.