DTC 01-D5 Absence of Registration Unit |
DTC 01-D8 No Response for Connection Check |
DTC 01-D9 Last Mode Error |
DTC 01-DA No Response Against ON / OFF Command |
DTC 01-DB Mode Status Error |
DTC 01-DE Slave Reset |
| DTC No. | DTC Detection Condition | Trouble Area |
| 01-D5 *1, *4 |
|
|
| 01-D8 *2, *4 | A component shown by the sub-code is (was) disconnected from the system after engine start. | |
| 01-D9 *1, *4 | The device that had functioned before the engine stopped is (was) disconnected from the system when the ignition switch to the ON or ACC position. | |
| 01-DA *4 |
| |
| 01-DB *1, *4 | A dual alarm is detected. | |
| 01-DE *3, *4 | A slave device has been disconnected after engine start. |
| 1.CHECK "RADIO AND NAVIGATION ASSEMBLY COMMUNICATION ERROR" IN FLOW CHART |
| NEXT | ||
| ||