Home › BODY ELECTRICAL › AUDIO / VISUAL › REAR NO. 2 SPEAKER

REAR NO. 2 SPEAKER > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT REAR NO. 2 SPEAKER

HINT:
Remove interior parts so that the rear No. 2 speaker can be seen.

  1. Check the speaker installation.

    OK:
    The speaker is securely installed.

    If the result is not as specified, reinstall the rear No. 2 speaker.

  1. Visually check the speaker.

    OK:
    The cone paper of the speaker is not torn.

    If the result is not as specified, replace the rear No. 2 speaker.