Home › BRAKE › BRAKE CONTROL › REAR SPEED SENSOR

REAR SPEED SENSOR > REMOVAL

for Preparation Click here


HINT:
Replacement of RH side is same as that of LH side.



1. REMOVE REAR WHEEL


2. REMOVE SPEED SENSOR REAR LH


    F043111
  1. Disconnect the speed sensor connector.



    F043113
  1. Remove the nut and speed sensor rear from the axle hub.

    NOTICE:
    1. Do not stick and foreign matter on the sensor tip.
    2. Do not let the foreign matter into the sensor installation hole.