Home › BRAKE › BRAKE CONTROL › YAW RATE AND ACCELERATION SENSOR

YAW RATE AND ACCELERATION SENSOR > REMOVAL

for Preparation Click here



1. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY


    B062740E01
  1. Disengage the 5 clips and 2 claws, and remove the console upper rear panel, and then disconnect the connectors.



2. REMOVE CONSOLE PANEL SUB-ASSEMBLY UPPER


    B062741E01
  1. Disengage the 6 clips and 2 claws, and then remove the upper console panel sub-assembly.

    NOTICE:
    Be careful not to snap the claws during the operation.



3. REMOVE CONSOLE UPPER PANEL GARNISH NO. 1


    B062742E01
  1. Disengage the clip.

  1. Pull the No. 1 console upper panel garnish rearward to be removed.



4. REMOVE CONSOLE UPPER PANEL GARNISH NO. 2


5. REMOVE CONSOLE BOX ASSEMBLY REAR


    B078371E01
  1. Disconnect the connectors.

  1. Remove the 6 bolts <B> and rear console box assembly.



6. REMOVE YAWRATE SENSOR


    F043114
  1. Disconnect the yawrate sensor connector.

  1. Remove the 2 bolts and yawrate sensor.