Home › BODY › EXTERIOR › FRONT BUMPER

FRONT BUMPER > INSTALLATION

for Preparation Click here



1. INSTALL FRONT BUMPER ASSEMBLY


    B120253
  1. Install the front bumper assembly with the 8 claws.

  1. with Fog light:

    1. Connect the fog light assembly connectors.



    B120252E02
  1. Install the 4 bolts and 9 screws.

    Torque:
    Bolt:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }
    Screw:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }

  1. Install the 3 clips.



2. CONNECT BATTERY NEGATIVE TERMINAL


3. VEHICLE FOR FOG LIGHT AIMING ADJUSTMENT


4. VEHICLE PREPARATION FOR FOG LIGHT AIM ADJUSTMENT


5. INSPECT FOG LIGHT AIMING
Click here


6. ADJUST FOG LIGHT AIMING
Click here


7. PERFORM INITIALIZATION
Some systems need initialization when disconnecting the cable from the negative battery terminal.