Home › BODY › EXTERIOR › FRONT BUMPER

FRONT BUMPER > DISASSEMBLY

for Preparation Click here



1. REMOVE FRONT BUMPER HOLE COVER LH (w/o Fog Light)


    B120254
  1. Disengage the 4 claws and remove the front bumper hole cover LH.



2. REMOVE FRONT BUMPER HOLE COVER RH (w/o Fog Light)

HINT:
Use the same procedures for the RH side and LH side.



3. REMOVE FRONT BUMPER HOLE COVER LH (w/ Fog Light)


    E116242
  1. Disengage the 4 claws and remove the front bumper hole cover.



4. REMOVE FRONT BUMPER HOLE COVER RH (w/ Fog Light)

HINT:
Use the same procedures for the RH side and LH side.



5. REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)
  1. Disconnect the connector.



    E116119
  1. Remove the bolt, 3 screws, and the headlight assembly.



6. REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)

HINT:
Use the same procedures for the RH side and LH side.



7. REMOVE RADIATOR GRILLE LOWER


    B120255
  1. Remove the 2 bolts.

  1. Disengage the 13 claws and remove the radiator grille lower.



8. REMOVE FRONT BUMPER COVER


9. REMOVE FRONT BUMPER REINFORCEMENT PLATE


    B120256
  1. Remove the 3 bolts and front bumper reinforcement plate.



10. REMOVE FRONT BUMPER SIDE MOUNTING BRACKET LH


    B120257
  1. Remove the bolt, 2 nuts and front bumper side mounting bracket LH.



11. REMOVE FRONT BUMPER SIDE MOUNTING BRACKET RH

HINT:
Use the same procedures for the RH side and LH side.



12. REMOVE FRONT BUMPER SIDE SUPPORT LH


    B120258
  1. Using a screwdriver, remove the 2 screws and front bumper side support LH.

    HINT:
    Tape the screwdriver tip before use.



13. REMOVE FRONT BUMPER SIDE SUPPORT RH

HINT:
Use the same procedures for the RH side and LH side.



14. REMOVE FRONT BUMPER ENERGY ABSORBER


    B120259
  1. Remove the front bumper energy absorber.



15. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY


    B120260
  1. Remove the 4 nuts and front bumper reinforcement sub-assembly.