Home › BODY › EXTERIOR › REAR BUMPER

REAR BUMPER > REMOVAL

for Preparation Click here



1. REMOVE QUARTER PANEL MUDGUARD SUB-ASSEMBLY REAR LH


    B120261
  1. Using a clip remover, remove the 2 clips.

  1. Remove the 7 screws and quarter panel mudguard sub-assembly rear LH.



2. REMOVE QUARTER PANEL MUDGUARD SUB-ASSEMBLY REAR RH

HINT:
Use the same procedures for the RH side and LH side.



3. REMOVE REAR BUMPER ASSEMBLY


    B120262
  1. Using a clip remover, remove the 2 clips.

  1. Remove the 8 bolts and 4 screws.



    B120263
  1. Disengage the 6 claws and remove the rear bumper assembly.