Home › BODY › EXTERIOR › REAR SPOILER

REAR SPOILER > INSTALLATION

for Preparation Click here



1. INSTALL REAR SPOILER CLIP NO. 1


    B064661
  1. Using an air riveter or hand riveter with nose piece, strike waterproof rivets of φ 4 mm into the body panel to install the 2 rear spoiler clips No. 1 to the back door panel.

    NOTICE:
    If the rivet is not positioned perpendicularly, it will bend the mandrel.



2. INSTALL CENTER STOP LIGHT ASSEMBLY


    B063787
  1. Install the stop light assembly with the 2 bolts.

    Torque:
    2.5 N*m{ 25 kgf*cm , 22 in.*lbf }



3. INSTALL REAR SPOILER


    B063789
  1. Connect the center stop light connector.

  1. Install the spoiler with the 2 bolts and 2 grommets.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }