Home › BRAKE › BRAKE › BRAKE PEDAL

BRAKE PEDAL > REMOVAL

for Preparation Click here



1. REMOVE INSTRUMENT PANEL FINISH PLATE


    B062737
  1. Remove the instrument panel finish plate.



2. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER


    B062738E01
  1. Remove the 2 bolts <B>.

  1. Disconnect the hood lock control cable assembly and fuel lid lock control cable sub-assembly.

  1. Disengage the 4 clips.

  1. Disconnect the connectors and remove the lower instrument panel finish panel sub-assembly.



3. REMOVE INSTRUMENT PANEL LOWER LH


    B062739E01
  1. Remove the 2 bolts <B>.

  1. Disengage the 2 claws and remove the instrument panel lower LH.



4. REMOVE PUSH ROD PIN
  1. Remove the clip and push rod pin from the brake pedal lever.



5. REMOVE BRAKE PEDAL SUPPORT REINFORCEMENT


    F043151
  1. Remove the bolt from the brake pedal support reinforcement.



    F043115
  1. Remove the bolt and nut, then remove the brake pedal support reinforcement from brake pedal support sub-assembly.



6. REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY
  1. Disconnect the stop light switch connector from the stop light switch assembly.



    F043116
  1. Remove the 4 nuts and brake pedal support sub-assembly.



7. REMOVE BRAKE PEDAL RETURN SPRING


8. REMOVE STOP LIGHT SWITCH ASSEMBLY
  1. Turn the stop light switch assembly counterclockwise and remove the stop light switch assembly.

  1. Remove the cushion from brake pedal support sub-assembly.



9. REMOVE BRAKE PEDAL SUB-ASSEMBLY


    F043117
  1. Remove the bolt and nut, then remove the brake pedal sub-assembly from brake pedal support sub-assembly.

  1. Remove the 4 brake pedal bushes from the brake pedal and brake pedal lever.

  1. Remove the 2 collars from brake pedal sub-assembly and brake pedal lever.