Home › BRAKE › BRAKE › BRAKE PEDAL

BRAKE PEDAL > REASSEMBLY

for Preparation Click here



1. INSTALL BRAKE PEDAL PAD
  1. Install the brake pedal pad to the brake pedal sub-assembly.



2. REMOVE BRAKE PEDAL LEVER
  1. Apply the lithium soap base glycol grease to the 2 brake pedal link pins, pedal shaft collars and 2 brake pedal link.

  1. Install the brake pedal lever with 2 brake pedal link pins, 2 brake pedal shaft collars and 2 brake pedal link to the brake pedal sub-assembly.

  1. Install the 2 new E-rings to each of brake pedal link pin.