REAR BRAKE > REMOVAL |
| 1. REMOVE REAR WHEEL |
| 2. DRAIN BRAKE FLUID |
| 3. DISCONNECT REAR LH FLEXIBLE HOSE |
![]() |
Remove the union bolt and gasket from the disc brake cylinder, then disconnect the flexible hose from the disc brake cylinder assembly rear.
| 4. REMOVE DISC BRAKE CYLINDER ASSEMBLY REAR LH |
![]() |
Remove the 2 cylinder slide pins from disc brake cylinder assembly rear.
Remove the disc brake cylinder assembly rear from rear disc brake cylinder mounting.
| 5. REMOVE DISC BRAKE PAD KIT REAR (PAD ONLY) |
Remove the 2 brake pads with anti-squeal shims from rear disc brake cylinder mounting.
| 6. REMOVE REAR DISC BRAKE ANTI-SQUEL SHIM |
Remove the 2 anti-squeal shims from each disc brake pads.
| 7. REMOVE REAR DISC BRAKE PAD WEAR INDICATOR PLATE |
Remove the pad wear indicator plate from the inner side disc brake pad.
| 8. REMOVE REAR DISC BRAKE PAD SUPPORT PLATE |
Remove the 4 pad support plates from the rear disc brake cylinder mounting.
| 9. REMOVE REAR DISC BRAKE CYLINDER MOUNTING LH |
![]() |
Remove the 2 bolts and rear brake cylinder mounting.
| 10. REMOVE REAR DISC BRAKE CYLINDER SLIDE BUSH |
Remove the 2 cylinder slide bushes from the rear disc brake cylinder mounting.
Remove the cylinder hole plug from the rear disc brake cylinder mounting.