Home › SUSPENSION & AXLE › SUSPENSION › FRONT SHOCK ABSORBER

FRONT SHOCK ABSORBER > REMOVAL

for Preparation Click here



1. REMOVE FRONT DISC WHEEL


2. REMOVE FRONT STABILIZER LINK ASSEMBLY LH


    C099158
  1. Remove the nut and disconnect the stabilizer link from the steering knuckle.

    HINT:
    If the ball joint turns together with the nut, use a hexagon (6 mm) wrench to hold the stud.



3. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

HINT:
Remove the RH side by following the same procedures with the LH side.



4. REMOVE FRONT STABILIZER BRACKET NO. 2 LH


5. REMOVE FRONT STABILIZER BRACKET NO. 1 RH


6. REMOVE STABILIZER BAR FRONT


7. REMOVE FRONT SHOCK ABSORBER WITH COIL SPRING (w/o REAS)


    C099159
  1. Remove the bolt, the nut and the washer.



    C099160
  1. Remove the 3 nuts on the upper side of the front shock absorber with coil spring.

  1. Remove the front shock absorber with coil spring.



8. REMOVE FRONT SHOCK ABSORBER WITH COIL SPRING (w/ REAS)

NOTICE:
Conduct the operations as stretching all the shock absorbers out by jacking up the vehicle.



    G020404E01
  1. As shown in the illustration, loosen the nut and disconnect the tube.

    NOTICE:
    Never loosen the absorber hoses and the flare nuts at the joint parts.



    G020405
  1. Remove a bolt and the bracket.



    C099159
  1. Remove a bolt, the nut and the washer.



    C099160
  1. Remove the 3 nuts on the upper side of the front shock absorber with coil spring.

  1. Remove the front shock absorber with coil spring.



9. REMOVE FRONT SUPPORT TO FRONT SHOCK ABSORBER NUT


    C099161E01
  1. Using SST, compress the coil spring.

    SST
    09727-30021   (09727-00010, 09727-00031)
    09727-00060  

    NOTICE:
    Do not use an impact wrench. It will damage the SST.



    C099162
  1. Hold the shock absorber rod, remove the nut.

    NOTICE:
    Do not use an impact wrench. It will damage the shock absorber rod.



10. REMOVE FRONT SHOCK ABSORBER CUSHION RETAINER


11. REMOVE FRONT SHOCK ABSORBER CUSHION NO. 1


12. REMOVE FRONT SUSPENSION SUPPORT SUB-ASSEMBLY LH


13. REMOVE FRONT SHOCK ABSORBER CUSHION RETAINER


14. REMOVE FRONT COIL SPRING LH


15. REMOVE FRONT SHOCK ABSORBER BUSH


    C099164E01
  1. Using SST and a press, remove the absorber bush.

    SST
    09710-22021   (09710-01071, 09710-01081)