Home › SUSPENSION & AXLE › SUSPENSION › FRONT STABILIZER BAR

FRONT STABILIZER BAR > REMOVAL

for Preparation Click here



1. REMOVE FRONT DISC WHEEL


2. REMOVE FRONT STABILIZER LINK ASSEMBLY LH


    G020161
  1. Remove the 2 nuts and the front stabilizer link assembly LH.

    HINT:
    If the ball joint turns together with the nut, use a hexagon (6 mm) wrench to hold the stud.



3. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

HINT:
Remove the RH side by following the same procedures withe the LH side.



4. REMOVE FRONT STABILIZER BRACKET NO. 2 LH


    G020162
  1. Remove the 2 bolts and front stabilizer bracket No. 2 LH.



5. REMOVE FRONT STABILIZER BRACKET NO. 1 RH

HINT:
Remove the RH side by following the same procedures withe the LH side.



6. REMOVE FRONT STABILIZER BAR BUSH NO. 1
  1. Remove the 2 front stabilizer bar bush No. 1.



7. REMOVE STABILIZER BAR FRONT