Symbols (Terminals No.)
| Wiring Color
| Terminal Description
| Condition
| Specified Condition
|
E8-23 (TC) - E6-1 (E1)
| P-L - W-B
| Ground
| Ignition switch ON
| 10 to 14 V
|
E8-23 (TC) - E6-1 (E1)
| P-L - W-B
| Ground
| Ignition switch ON, Connect terminals TC and CG of DLC3
| Below 2 V
|
E8-15 (STP) - E6-1 (E1)
| G-Y - W-B
| Stop light signal
| Ignition switch ON, Depress brake pedal
| 10 to 14 V
|
E8-15 (STP) - E6-1 (E1)
| G-Y - W-B
| Stop light signal
| Ignition switch ON, Release brake pedal
| Below 1 V
|
E7-2 (CCS) - E6-1 (E1)
| L-B - W-B
| Cruise control main switch circuit
| Ignition switch ON
| 9 to 14 V
|
E7-2 (CCS) - E6-1 (E1)
| L-B - W-B
| Cruise control main switch circuit
| Ignition switch ON, CANCEL switch hold ON
| 6.0 to 10.1 V
|
E7-2 (CCS) - E6-1 (E1)
| L-B - W-B
| Cruise control main switch circuit
| Ignition switch ON, -/SET switch hold ON
| 4.0 to 7.1 V
|
E7-2 (CCS) - E6-1 (E1)
| L-B - W-B
| Cruise control main switch circuit
| Ignition switch ON, +/RES switch hold ON
| 2.1 to 4.0 V
|
E7-2 (CCS) - E6-1 (E1)
| L-B - W-B
| Cruise control main switch circuit
| Ignition switch ON, MAIN switch hold ON
| Below 1 V
|
E8-16 (ST1-) - E6-1 (E1)
| R-L - W-B
| Stop light signal
| Ignition switch ON, Depress brake pedal
| Below 1 V
|
E8-16 (ST1-) - E6-1 (E1)
| R-L - W-B
| Stop light signal
| Ignition switch ON, Release brake pedal
| 10 to 14 V
|
E7-18 (PI) - E6-1 (E1)
| LG - W-B
| Cruise MAIN indicator light signal
| Ignition switch ON, Cruise control main switch ON
| 0 to 3 V
|
E7-18 (PI) - E6-1 (E1)
| LG - W-B
| Cruise MAIN indicator light signal
| Ignition switch ON, Cruise control main switch ON
| 9 to 14 V
|