AUDIO AND VISUAL SYSTEM > Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter |

| 1.CHECK HARNESS AND CONNECTOR (RADIO RECEIVER - STEREO JACK ADAPTER) |
![]() |
Disconnect the connectors from the stereo jack adapter and radio receiver.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| AUXO - AUXI | Always | Below 1 Ω |
| ASGN - ASGN | Always | Below 1 Ω |
| ARO - ARI | Always | Below 1 Ω |
| ALO - ALI | Always | Below 1 Ω |
| AUXO - Body ground | Always | 10 kΩ or higher |
| ASGN - Body ground | Always | 10 kΩ or higher |
| ARO - Body ground | Always | 10 kΩ or higher |
| ALO - Body ground | Always | 10 kΩ or higher |
|
| ||||
| OK | ||
| ||