Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM

NAVIGATION SYSTEM > CD Sound Skips

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK CD


    I100151
  1. Check the CD.

    OK:
    The CD is clean.

    HINT:
    If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

    NOTICE:
    Do not use a conventional record cleaner or anti-static preservative.



NG
CLEAN CD
OK


2.CHECK CD


    I100152
  1. Check that the CD is not deformed or cracked.

    OK:
    No deformation or cracks on the CD.



NG
CD IS FAULTY
OK


3.CHECK OPERATION USING ANOTHER CD
  1. Check using another CD.

    1. Check if the problem recurs using another CD.

      OK:
      The problem does not occur.



OK
CD IS FAULTY
NG


4.CHECK RADIO AND NAVIGATION ASSEMBLY
  1. Check the radio and navigation assembly installation condition.

    1. Check that the radio and navigation assembly is properly installed.

      OK:
      Radio and navigation assembly is properly installed.



NG
REINSTALL RADIO AND NAVIGATION ASSEMBLY
OK

REPLACE RADIO AND NAVIGATION ASSEMBLY