NAVIGATION SYSTEM > Television Display Power Source Circuit |

| 1.INSPECT TELEVISION DISPLAY ASSEMBLY |
![]() |
Disconnect the connector from the television display assembly.
Measure the resistance according to the value(s) in the table below.
| Tester connection | Condition | Specified condition |
| GND6 - Body ground | Always | Below 1 Ω |
Measure the voltage according to the value(s) in the table below.
| Tester connection | Condition | Specified condition |
| +B2 - GND | Always | 10 to 14 V |
| ACC4 - GND | Ignition SW ACC | 10 to 14 V |
|
| ||||
| OK | ||
| ||