NAVIGATION SYSTEM > Sound Signal Circuit between Radio and Navigation Assembly and Stereo Component Amplifier |

| 1.CHECK HARNESS AND CONNECTOR (RADIO AND NAVIGATION ASSEMBLY - STEREO COMPONENT AMPLIFIER) |
![]() |
Disconnect the connectors from the radio and navigation assembly and stereo component amplifier.
Measure the resistance according to the value(s) in the table below.
| Tester connection | Condition | Specified condition |
| L+ - L+ | Always | Below 1 Ω |
| L- - L- | Always | Below 1 Ω |
| R+ - R+ | Always | Below 1 Ω |
| R- - R- | Always | Below 1 Ω |
| SLD - SLD | Always | Below 1 Ω |
| SLD - Body ground | Always | 10 kΩ or higher |
| L+ - Body ground | Always | 10 kΩ or higher |
| L- - Body ground | Always | 10 kΩ or higher |
| R+ - Body ground | Always | 10 kΩ or higher |
| R- - Body ground | Always | 10 kΩ or higher |
|
| ||||
| OK | ||
| ||