Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM

DTC    44-46    Scratched / Reversed Disc

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detecting Condition
Trouble Area
44-46
Scratches or dirt is found on DVD surface or DVD is set upside down.
  1. DVD
  2. Television display assembly

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs.

1.CHECK THAT DISC IS INSERTED PROPERLY
  1. Check whether or not the disc is inserted upside down.

    OK:
    Disc is properly inserted.



NG
REINSERT DISC
OK


2.CHECK DISC


    I100152
  1. Check that the disc is not deformed or cracked.

    OK:
    No deformation or cracks on the disc.



NG
CHANGE DISC
OK


3.DISC CLEANING


    I100151
  1. Disc cleaning

    1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

      NOTICE:
      Do not use a conventional record cleaner or anti-static preservative.


NEXT


4.CLEAR DTC
  1. Clear the DTCs (Click here).


NEXT


5.RECHECK DTC
  1. Recheck for DTCs and check if the same trouble occurs again.

OK:
Malfunction disappears.



OK
END
NG


6.REPLACE DISC WITH ANOTHER AND RECHECK
  1. Replace the disc with another and recheck.

    1. Replace the disc with another normal one.

    2. Clear the DTCs (Click here).

    3. Recheck for DTCs and check if the same trouble occurs again.

      OK:
      Malfunction disappears.



NG
REPLACE TELEVISION DISPLAY ASSEMBLY
OK

END