DTC P0121 Throttle / Pedal Position Sensor / Switch "A" Circuit Range / Performance Problem |
| DTC No. | DTC Detection Conditions | Trouble Areas |
| P0121 | Difference between VTA1 and VTA2 voltages less than 0.8 V, or more than 1.6 V for 2 seconds (1 trip detection logic) | TP sensor (built into throttle body) |
| Related DTCs | P0121: TP sensor rationality |
| Required Sensors / Components (Main) | TP sensor |
| Required Sensors / Components (Related) | - |
| Frequency of Operation | Continuous |
| Duration | 2 seconds |
| MIL Operation | Immediate |
| Sequence of Operation | None |
| This monitor will not run whenever these DTCs are not present | None |
| Either of the following conditions 1 or 2 | - |
| 1. Ignition switch | ON |
| 2. Electric throttle motor power | ON |
| TP sensor malfunction (P0120, P0122, P0123, P0220, P0222, P0223, P02135) | Not detected |
| Different between VTA1 and VTA2 |VTA1 - (VTA2 x 0.8 to 1.2)|* * Corrected by learning value | Less than 0.8 V, or more than 1.6 V |
| 1.REPLACE THROTTLE BODY ASSEMBLY |
Replace the throttle body assembly (Click here).
| NEXT | ||
| ||