CAN COMMUNICATION SYSTEM > PRECAUTION |
| 1.HANDLING PRECAUTIONS ON STEERING SYSTEM |
Care must be taken when replacing parts. Incorrect replacement could affect the performance of the steering system and result in hazardous driving.
| 2.HANDLING PRECAUTIONS ON SRS AIRBAG SYSTEM |
This vehicle is equipped with an SRS (Supplemental Restraint System), such as the driver airbag and front passenger airbag. Failure to carry out service operation in the correct sequence could cause the SRS to unexpectedly deploy during servicing, possibly leading to a serious accident. Before servicing (including removal or installation of parts, inspection or replacement), be sure to read the precautionary notice for the supplemental restraint system (Click here).
| 3.WIRE HARNESS REPAIR |
![]() |
After repairing the wire bus line with solder, wrap the repaired part with vinyl tape.
![]() |
Do not perform bypass wiring between the connectors.
| 4.CONNECTOR HANDLING |
![]() |
When inserting tester probes into a connector, insert them from the back of the connector.
![]() |
If it is impossible to check resistance from the back of the connector, use a repair wire to check it.