Home › BODY ELECTRICAL › WIPER AND WASHER › WIPER AND WASHER SYSTEM

WIPER AND WASHER SYSTEM > TERMINALS OF ECU

for Preparation Click here



Multiplex Network Body Computer

I034371E01


Standard voltage:

Terminal No. (Symbols)
Wiring color
Condition
Specified condition
1B-1 - 1H-2
(WMTR - GND1, 2)
-
Rear washer switch OFF → ON
10 to 14 V → Below 1 V
1H-2 - Body ground
(GND1 - Body ground)
-
Constant
Below 1 V
1C-2 - 1H-2
(SIG - GND1, 2)
-
Ignition switch is OFF → ON
Below 1 V → 10 to 14 V
1H-2 - Body Ground
(GND2 - Body ground)
-
Constant
Below 1 V
B4-23 - 1H-2
(MPX2 - GND1, 2)
BR-R - -
Ignition switch is ON
Signal waveform
B6-9 - 1H-2
(RWINT - GND1, 2)
BR-W - -
Ignition switch is ON and rear wiper switch is OFF → INT
10 to 14 V → Below 1 V
B6-10 - 1H-2
RWON - GND1, 2)
GR-R - -
Ignition switch is ON and rear wiper switch is OFF → ON
10 to 14 V → Below 1 V


Multiplex Network Door ECU Back:

I033329E02


Standard voltage:

Terminal No. (Symbols)
Wiring color
Condition
Specified condition
B8-1- B8-3
(MPX2 - GND)
R - W-B
Ignition switch is ON
Signal waveform
B8-3 - Body ground
(GND - Body ground)
W-B - -
Constant
Below 1 V
B8-4 - B8-3
(BDR - GND)
L - W-B
Constant
10 to 14 V
B8-6 - B8-3
(SIG - GND)
B - W-B
Ignition switch is OFF → ON
Below 1 V → 10 to 14 V
B9-1 - B8-3
(WIP- - GND)
R-G - W-B
Ignition switch is ON and wiper switch ON or INT
Puls generation
B9-2 - B8-3
(WIP+ - GND)
Y-G - W-B
Ignition switch is ON and wiper switch ON or INT
Puls generation
B9-3 - B8-3
(W - GND)
BR-B - W-B
Ignition switch is ON
Puls generation
B9-11 - B8-3
(IC+ - GND)
Y-G - W-B
Ignition switch is ON
Below 1 V → 10 to 14 V
B9-16 - B8-3
(IC1 - GND)
B-O - W-B
Back door power window up and down
Puls generation
B9-17 - B8-3
(IC2 - GND)
W-R - W-B
Back door power window up and down
Puls generation
B9-23 - B8-3
(IC- - GND)
L-W - W-B
Constant
Below 1 V