Home › BODY ELECTRICAL › LIGHTING › TOWING CONVERTER RELAY

TOWING CONVERTER RELAY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT TOWING CONVERTER RELAY


    E064833
  1. Measure voltage between terminals as shown in the chart below.

    Tester connection
    Condition
    Specified condition
    1 - Ground
    Constant
    Battery positive voltage
    2 - Ground
    Turn signal switch (right turn) OFF → ON
    0 V → 10 to 14 V (60 to 120 time per minutes)
    2 - Ground
    Depress the brake pedal
    Battery positive voltage
    3 - Ground
    Turn signal switch (right turn) OFF → ON
    0 V → 10 to 14 V (60 to 120 time per minutes)
    4 - Ground
    Turn signal switch (left turn) OFF → ON
    0 V → 10 to 14 V (60 to 120 time per minutes)
    4 - Ground
    Depress the brake pedal
    Battery positive voltage
    6 - Ground
    Constant
    Continuity
    8 - Ground
    Depress the brake pedal
    Battery positive voltage
    9 - Ground
    Turn signal switch (left turn) OFF → ON
    0 V → 10 to 14 V (60 to 120 time per minutes)