Home › BODY ELECTRICAL › LIGHTING › STOP LIGHT SWITCH

STOP LIGHT SWITCH > INSPECTION

for Preparation Click here



1. INSPECT STOP LIGHT SWITCH ASSEMBLY


    E065594E50
  1. Check that the continuity between terminals at each switch position, as shown in the chart.

    Standard:
    Switch position
    Tester connection
    Specified condition
    Switch pin free
    1 - 2
    No continuity
    Switch pin free
    3 - 4
    Continuity
    Switch pin pushed in
    1 - 2
    Continuity
    Switch pin pushed in
    3 - 4
    No continuity