Home › BODY › SEAT › FRONT SEAT ASSEMBLY (for Manual Seat Type LH Side)

FRONT SEAT ASSEMBLY (for Manual Seat Type LH Side) > INSTALLATION

for Preparation Click here



1. INSTALL FRONT SEAT ASSEMBLY LH
  1. Place the front seat assembly LH in the cabin.

    NOTICE:
    Be careful not to damage the body.

  1. Connect the connectors under the front seat assembly LH.

  1. Install the front seat assembly LH with the 4 bolts.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }



2. INSTALL SEAT TRACK BRACKET COVER INNER LH


3. INSTALL SEAT TRACK OUTER COVER LH


4. INSTALL SEAT TRACK BRACKET COVER INNER FRONT LH


5. INSTALL SEAT TRACK BRACKET COVER OUTER FRONT LH


6. CHECK SRS WARNING LIGHT


7. CHECK SEAT SLIDE ADJUSTER LOCKS
  1. When sliding the front seat assembly LH, check that both sides of the adjuster lock simultaneously.