AIR CONDITIONING SYSTEM > Vehicle Speed Signal Circuit |

| 1.INSPECT AIR CONDITIONING AMPLIFIER (SPD) |
![]() |
Remove the A/C amplifier with the connectors still connected.
Shift the shift lever to neutral.
Lift up the vehicle.
Turn the ignition switch ON.
![]() |
Measure the voltage between terminal SPD of the A/C amplifier connector and body ground when the wheel is turned slowly.
|
| ||||
| OK | ||
| ||
| 2.CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - A/C AMPLIFIER) |
Check for open and short circuit in the harness and the connector between the combination meter assembly and the A/C amplifier (Click here).
|
| ||||
| OK | ||
| ||