Home › ENGINE ยท 1GR-FE › ENGINE CONTROL SYSTEM › SFI SYSTEM

SFI SYSTEM > PRECAUTION

for Preparation Click here



1.INITIALIZATION

NOTICE:
  1. Perform the RESET MEMORY (AT initialization) when replacing the automatic transmission assembly, engine assembly or ECM (Click here).
  2. Perform the REGISTRATION (VIN registration) when replacing the ECM (Click here).

HINT:
RESET MEMORY can not be completed by only removing the battery.


2.FOR USING INTELLIGENT TESTER

NOTICE:
Observe the following items for safety reasons:
  1. Read its instruction books before using the tester.
  2. Prevent the tester cable from being caught on the pedals, shift lever and steering wheel when driving with the tester connected to the vehicle.
  3. When driving the vehicle for testing purposes using the tester, two persons are required. One is for driving the vehicle, and the other operates the tester.