Home › ENGINE ยท 2UZ-FE › ENGINE CONTROL SYSTEM › ECM

ECM > INSTALLATION

for Preparation Click here



1. INSTALL ECM


    A072553
  1. Install the ECM bracket No. 2 with the 2 screws to the ECM.

  1. Install the ECM bracket No. 1 with the 2 screws to ECM.

  1. Install the ECM with the 3 nuts.

    Torque:
    13 N*m{ 133 kgf*cm , 10 ft.*lbf }

  1. Connect the 5 ECM connector.



2. INSTALL INSTRUMENT PANEL FINISH PANEL LOWER NO.2


3. INSTALL GLOVE COMPARTMENT DOOR SUB-ASSEMBLY


4. INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO. 2