Home › ENGINE ยท 2UZ-FE › ENGINE CONTROL SYSTEM › ACCELERATOR PEDAL

ACCELERATOR PEDAL > INSTALLATION

for Preparation Click here



1. INSTALL ACCELERATOR PEDAL ROD ASSEMBLY

NOTICE:
  1. Be care not to give a shock to the accelerator pedal assembly.
  2. Be care not to disassemble the accelerator pedal assembly.



    A067127
  1. Install the accelerator pedal assembly with the 2 nuts.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }

  1. Connect a accelerator pedal connector.