Home › ENGINE ยท 1GR-FE › ENGINE CONTROL SYSTEM › ECM

ECM > REMOVAL

for Preparation Click here



1. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO. 2


2. REMOVE GLOVE COMPARTMENT DOOR SUB-ASSEMBLY


3. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER NO.2


4. REMOVE ECM


    A072578
  1. Disconnect the 5 the ECM connectors from the ECM.

  1. Remove the 3 nuts and the ECM.

  1. Remove the 2 screws and the ECM bracket No. 1 from the ECM.

  1. Remove the 2 screws and the ECM bracket No. 2 from the ECM.