Home › BODY › SEAT › REAR NO. 1 SEAT ASSEMBLY

REAR NO. 1 SEAT ASSEMBLY > REMOVAL

for Preparation Click here


HINT:
Installation is in the reverse order of removal. However, only installation procedures requiring additional information are included.



1. REMOVE REAR SEAT HEADREST ASSEMBLY LH AND RH


2. REMOVE REAR SEAT HEADREST ASSEMBLY CENTER


3. REMOVE REAR SEAT CUSHION ASSEMBLY LH
  1. Remove the 2 hinge covers.

  1. Remove the 2 bolts and seat cushion.



4. REMOVE REAR SEAT CUSHION ASSEMBLY RH
  1. Remove the 2 hinge covers.

  1. Remove the 2 bolts and seat cushion.



5. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY LH


    B064775E01
  1. Using a screwdriver, disengage the 6 clips and remove the carpet.

    HINT:
    Tape the screwdriver tip before use.



6. REMOVE REAR SEATBACK ASSEMBLY LH
  1. Remove the 2 bolts and seatback.



7. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY RH


    B064776E01
  1. Using a screwdriver, disengage the 9 clips and remove the carpet.

    HINT:
    Tape the screwdriver tip before use.



8. REMOVE REAR SEATBACK ASSEMBLY RH
  1. Remove the bolt and the floor anchor for the rear seat belt outer center.

  1. Remove the 2 bolts and seatback.