REAR NO. 2 SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side) > DISASSEMBLY |
| 1. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER LH |
Using a screwdriver, remove the screw cover, screw and release handle LH.
![]() |
Disengage the claws and remove the 2 screws and reclining cover LH.
![]() |
Disengage the claws and remove the 2 screws and reclining cover RH.
![]() |
Disengage the seatback cover hem.
![]() |
Insert a screwdriver between the seat cushion cover and seat cushion under cover.
Pry the seat cushion cover hem to disengage it.
Cut the hog rings and bring out the seat cushion cover together with the pad.
Remove the nut and disconnect the rear seat 3-point type seat belt assembly LH.
Remove the seat cushion cover together with the pad.
Cut the hog rings and remove the seat cushion cover from the pad.
| 2. REMOVE REAR SEAT ARMREST ASSEMBLY CENTER |
Open the faster of the seatback cover.
Remove the screw and armrest cover.
Remove the 3 bolts, guide, armrest hinge and armrest.
| 3. REMOVE REAR SEATBACK ASSEMBLY LH |
Disconnect the seat lock control cables from the seatback frame.
Remove the 3 bolts, washer, grommet and seatback stopper plate.
![]() |
Disengage the claws and remove the 2 screws and 2 reclining covers.
Remove the 4 bolts and rear seatback LH.
| 4. REMOVE REAR SEATBACK COVER LH |
Remove the 2 tether anchor covers.
Remove the rear seat protector.
![]() |
Push the claws and remove the 4 headrest supports.
Remove the rear seat shoulder belt hole cover.
Remove the seatback cover together with the pad.
Cut the rings and remove the seatback cover.
| 5. REMOVE NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH |
Remove the 2 screws and reclining adjuster cover.
Using a screwdriver, remove the rear seat shoulder belt hole cover.
Remove the 2 nuts, 2 screws and seat belt.
| 6. REMOVE REAR SEAT HINGE SUB-ASSEMBLY LH |
![]() |
Using the screwdriver, remove the spring of the seat stay ball-joint.
Disconnect the ball-joint from the seat cushion frame.
Remove the hinge cover, E-ring, pin, hinge guide, spring and hinge together with the seat stay.
| 7. REMOVE REAR SEAT HINGE SUB-ASSEMBLY RH |
Remove the hinge cover, E-ring, pin, hinge guide and hinge.
| 8. REMOVE REAR SEAT CUSHION UNDER COVER LH |
Remove the 7 screws, cushion and cover.
| 9. REMOVE REAR SEAT INNER BELT ASSEMBLY |
Remove the nut and rear seat belt inner.
Remove the nut and rear seat belt inner No. 2.
| 10. REMOVE FOLD SEAT LOCK CONTROL CABLE ASSEMBLY |
| 11. REMOVE REAR NO. 1 SEAT LOCK CABLE ASSEMBLY |
| 12. REMOVE REAR SEAT RECLINING CONTROL WIRE SUB-ASSEMBLY |