Home › BODY › SEAT › REAR NO. 2 SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side)

REAR NO. 2 SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side) > REASSEMBLY

for Preparation Click here



1. INSTALL FOLD SEAT LOCK CONTROL CABLE SUB-ASSEMBLY


2. INSTALL REAR SEAT INNER BELT ASSEMBLY
  1. Install the rear seat belt inner No. 2 with the nut.

    Torque:
    42 N*m{ 430 kgf*cm , 31 ft.*lbf }

  1. Install the rear seat belt inner with the nut.



3. INSTALL REAR SEAT CUSHION UNDER COVER LH
  1. Install the cover with the 6 screws.

  1. Install the cushion with the screw.



4. INSTALL REAR SEAT HINGE SUB-ASSEMBLY RH
  1. Install the hinge guide to the hinge.

  1. Install the hinge with the pin and new E-ring.

  1. Install the hinge cover.



5. INSTALL REAR SEAT HINGE SUB-ASSEMBLY LH
  1. Install the spring to the ball-joint of the seat stay.

  1. Connect the ball-joint to the seat cushion frame securely.

  1. Install the spring and hinge guide to the hinge.

  1. Install the hinge with the pin and new E-ring.

  1. Install the hinge cover.



6. INSTALL NO. 1 3 POINT TYPE BELT ASSEMBLY LH
  1. Install the seat belt with the 2 nuts and 2 screws.

  1. Install the rear seat shoulder belt hole cover.

  1. Install the reclining adjuster cover with the 2 screws.



7. INSTALL REAR SEATBACK COVER LH
  1. Install the seatback cover to the seatback pad with new hog rings.

  1. Install the seatback cover together with the pad to the seatback frame.

  1. Install the 2 headrest supports.

    NOTICE:
    Be careful not to mistake the headrest support direction.

  1. Connect the rear seat lock cable to the rear seat reclining cover.

  1. Install the rear seat protector.

  1. Install the 2 tether anchor covers.



8. INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY LH
  1. Install the rear seatback LH with the 4 bolts.

    Torque:
    50 N*m{ 510 kgf*cm , 37 ft.*lbf }



    B064887E01
  1. Install the 2 reclining covers with the 2 screws.

  1. Install the seatback stopper plate to the seat cushion frame with the 2 bolts.

  1. Install the grommet, washer and bolt.

  1. Connect the seat lock control cables to the seatback frame.



9. INSTALL REAR SEAT ARMREST ASSEMBLY CENTER
  1. Install the armrest.

  1. Install the guide to the armrest hinge.

  1. Install the armrest hinge with the 3 bolts.

  1. Install the armrest cover with the screw.

  1. Close the faster of the seatback cover.



10. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER LH
  1. Install the seat cushion cover to the seat cushion pad with new hog rings.

  1. Install the No .1 seat 3-point type belt through the seat cushion pad.

  1. Install the No .1 seat 3-point type belt with the bolt.

    Torque:
    42 N*m{ 430 kgf*cm , 31 ft.*lbf }

  1. Install the seat cushion cover together with the pad to the seat cushion frame with new hog rings.



    B063212
  1. Securely engage the seat cushion cover hem to the seat cushion under cover.



    B063210
  1. Engage the seatback cover hem.



    B063202E01
  1. Install the reclining cover RH with the 2 screws.



    B063206E01
  1. Install the reclining cover LH with the 2 screws.

  1. Install the release handle LH with the screw.

  1. Install the screw cover.